previous page                      next page  

---

Effect processors are available in Melody Assistant from version 4.3 and in Harmony Assistant from version 6.3.

These effect processors are organised like a guitar multi-effect footswitch : several effect types can be cascaded in order to change the original sound of the instrument. As many effects as you need can be inserted in a staff : instrument sounds can then be changed while music is playing.

Effect processors can be applied to standard sounds as well as to user sounds.

Several predefined effect processors are provided with the software, but you can easily define your own, and then insert them into your tunes or share them with other users.

Inserting an effect

Select the "Effect processor" tool (blue footswitch icon) in the "Miscellaneous" tool palette and click where you want it to be inserted in the staff.

The effect editing window opens.

Later, you will be able to double-click on the effect with the lasso tool to open the effect editing window again.

Editing an effect

In the effect editing window, you can see :

On the left, the list of effect types. These effects types can be cascaded to produce the sound you wish.

In the middle, the way this effect type is applied to the sound..

Two icons are available for any effect type :

• Do not modify, which means this effect type is unchanged and keeps the previously set parameters.
• Stop, which means this effect type is stopped and is not used anymore to process the sound.

You can edit these parameters by entering their value with the keyboard or by moving control handles on the graphics.

The Icon used to display this effect on the score. This icon can be chosen from amongst a set of predefined icons ("Change" button) or drawn with the integrated icon editor ("Edit" button).

Tip :  On a score, the staff an effect processor is applied to is the one including the top edge of the effect's icon. While editing an effect processor, the name of the staff containing the effect is displayed in the window title bar.

The Try button (little electric guitar). Plays a bit of the staff this effect is assigned to.
The effect name, which is displayed on a score to the right of the icon. Text font and style can be chosen.
Comment, to write remarks about this effect.
The Print check box. When checked, the effect will be printed on the score.
The Predef button, to chose an  effect from amongst the predefined set.

Tip :  You can add your own effects to the predefined set by saving them in the "FXs" folder.

Load and Save buttons, to load or save your effects separately from the score in which  they are included.The file extension for these files is ".FX". This file format is compatible with both Macintosh and Windows, and can be sent in ascii or binary format through the Internet.
When you have designed some really interesting effects, share them on the Internet with other users. The "Comment" field, which is not displayed, enables you to write your name or e-mail address.

Note :  Effect processors are time-consuming in terms of computer power. If your computer is too slow, you can disable the effect processors via the software digital output configuration window.

1) Check the software setup

"Configuration>digital output configuration" menu : Ensure digital output parameters have been set properly. Recommended values are 44kHz, 16 bits, stereo, quality.
"Enable effect processors" must be checked.

"Configuration>Global setup>Load" menu : ensure that under Adapt music to existing devices the Set to radio button is selected  and digital output  chosen (use the Change button if neccessary).

2) Create a document

"File> New" menu option : select  a "Simple" template and insert notes into the first 6 bars of the first staff.
or "File>Open" menu and select an existing tune.

Press the space bar : the music starts playing.
Press the space bar again : the music stops.

3) Insert an effect

Ensure that the "Miscellaneous" tool palette is displayed, or activate it through the "Windows>Miscellaneous tools" menu option.
Click the blue guitar footswitch icon.

Click on the staff, just before the first note : an effect processor is inserted into the score and the effect processor editing window opens.

4) Set up the effect

Click the little guitar icon : the first 6 bars of the staff are played in a loop, so that you can try your effect processor in real-time. At this stage you should hear the notes playing. Leave this mode on.

Click the "Predef" button : the list of predefined effect processors appears. Select for example "Church Reverb" and click "OK". Notes are now played with a deep reverberation.

You can try several predefined effect processors, then start to change some parameters to get the sound you wish.

Resonator/Wah

Technically, this is a resonant band-pass filter.This kind of acoustic filter accentuates a given frequency and reduces all others.
The frequency is given in hertz (Hz) and specifies the sound frequency to enhance .
The resonance level defines the amplifying factor at this frequency. Finally, an output gain control adjusts the sound output volume.

Note :  The frequency of an A at octave 4  is 440 Hz, and frequency is doubled for each octave. Thus, if the resonating filter frequency is set to 1760 Hz, the note A 6 will be specially enhanced and will become resonant

The resonator can be applied in several ways :

Fixed : The frequency is set to a given value. A smooth change can be applied to frequency or resonance. In this case, the parameter starts from the given value, and moves smoothly to the value set by the next effect of this type on the same staff.

LFO  (Low Frequency Oscillator) : Frequency increases and decreases regularly over time. The control handles on the graph (or numerical values) enable you to set the highest and lowest frequencies of the oscillation, its starting point and the oscillation period (in milliseconds).
The Direction check box defines whether the oscillation begins with an increasing or decreasing frequency.
A smooth change can be applied to resonance. In this case, resonance starts from the given value, and moves smoothly to the value set by the next effect of this type on the same staff.

Wah : simulates the automatic Wah-Wah effect found in some guitar effect processors. Resonator frequency is linked to the current  volume of the music : the louder the sound, the higher the resonator frequency. On the graph, frequency is drawn on the vertical axis and sound volume on the horizontal axis (quiet sounds on the left, loud sounds on the right).
A smooth change can be applied to resonance. In this case, resonance starts at  the given value, and moves smoothly to the value set by the next effect of this type on the same staff.

Technically, this kind of effect simulates the sound of overdriven guitar amplifiers. When the input level becomes too high the signal is distorted. Distortion and Overdrive are two way this effect can be rendered.
Power sets the sound volume trigger from which the Distortion/Overdrive effect begins. With a low power, only loud sounds will be altered. With a power near 100%, even notes played weakly will be altered.
These effects can generate unwanted high-pitched harmonics. It is therefore possible to set a low-pass filter (Tone) to soften the sound by reducing  these higher frequencies .
Finally, an output gain control adjusts the sound output volume.

Technically, this kind of effect adds a sound back to itself after a slight delay, which varies over time..
Power sets the quantity of feedback, and thus the scale of the effect. A Low Frequency Oscillator (LFO) makes the delay change across time.
The only difference between Flanger and Chorus is the range of oscillation speeds.

This kind of effect enables to adjust the instrument tone and output power.
On the graphics, you can control the amount of bass and treble.
With the "gain", you select the instrument output level.
The "limiter" enable to bound the output level in order to avoid general  saturation of your tune. By setting a low value to this parameter, you increase the risk that loud notes or chords of the given staff saturate (you can then decrease the gain), but in this case only the staff will be affected. Other sounds played by other staves will still be heard.

This effect alters the location of sound in stereophonic space.
The panning location can range from extreme left (negative values) to extreme right (positive values).
Panning can be :
Fixed :  Panning is set to a given value. A smooth change can be applied to this value. In this case, panning starts from the given value, and moves smoothly to the value set by the next effect of this type on the same staff.

LFO  (Low Frequency Oscillator) : Panning moves from left to right and from right to left regularly over time. The control handles on the graph (or numerical values) enable you to set the highest and lowest panning values of the oscillation, its starting point and the oscillation period (in milliseconds).
The Direction check box defines whether the oscillation begins moving from left to right or from right to left.

These are echo or reverberation effects applied to the input sound. Three kinds of echo or reverberation can be applied :

Delay : This is a one-time echo, occuring after a given time. The time that elapses before the echo (in milliseconds) as well as the echo power (as a percentage of the original sound) can be set.
The Ping-Pong box, when checked, makes the echo appear at the opposite panning location to the original sound.

Feedback Delay : This is the same effect as above, except that echo is added to the original sound and processed again (and again, and again...). A serie of echoes regularly distributed in time, and with a decreasing intensity, is heard. If the Ping-Pong check box is enabled, echoes alternate left and right.

Reverb : This is an approximation of a real room reverberation. Reverberation power and total duration (up to 5 sec, i.e. 5000 ms) can be set. If the Ping-Pong box is checked, reverberations fill the whole stereophonic space.

---

  previous page                      next page