Author |
Topic: "slight Reverb", How do get rid of these? or are they important? (Read 1520 times) |
|
David09
Board Full Member
Gender: 
Posts: 116
|
 |
Re: "slight Reverb", How do get rid of these? or are they important?
« Reply #15 on: Jul 6th, 2012, 6:57pm » |
Quote | Modify
|
on Jul 6th, 2012, 4:36pm, JP wrote:OK
I got your file, which is full of empty bars, which does not help a lot for listening. There is no option in HA to tell it to skip empty bars, so even if you start at bar 7, you will have 7 empty bars (bar 11 - 17), and so on.
As far as the reverb is concerned, delete the small "landscape" pictures at the beginning of the file. I don't know why, but it seems to suppress the reverb effect.
|
|
Sorry, JP, the rest is in the Logic Pro project. But you surely are familiar with Glucks' Orfeo-this is the start of that long series of choirs and Orfeo playing his harp and singing ,in each aria between the choruses, some of the most touching melodies ever written. I know,there are lots of commercial recordings of the Opera but my siblings would never buy a CD of this or listen to it on the radio, so I am saying good bye to them by making a CD at home of music I find so beautiful I want them to give it a try. This has worked before, but those were commercial CD's and I doubt any of my siblings or friends would listen to the complete Lully "Atys", I was there in the pit when the gobelin tapestries were dropped to the ground by the choir members standing at the top of the scene-the whole thing brightly lit up from the sides of the stage, an amazing effect. the advice from SDoerr was great, in scroll mode the rests are used, so when I put this back into the Logic Project the empty bars are filled with Orfeo and his Harp. I still need to find a Castrato voice to sing Orfeo, in Che faro the melody goes up to an E so high I've forgotten what to name it, I hope there is such a voice available in VS,do you know of one? i sent my score[only the melody] to Olivier at his request because it came out wrong. I must remember to remove all but the bare bones when transferring MIDI files.
|
|
 offline |
Albert Einstein: "Only two things are definite, the Universe, and Human stupidity, and I am not sure about the former."
|
|
|
David09
Board Full Member
Gender:
Posts: 116
|
|
Re: "slight Reverb", How do get rid of these? or are they important?
« Reply #16 on: Jul 6th, 2012, 7:03pm » |
Quote | Modify
|
on Jul 6th, 2012, 3:54pm, SDoerr wrote:I have a MIDI-imported file that has Voice Reverb at the beginning of each stave, so I'll assume your 'Slight Reverb' is something similar. First of all, I always switch out of Page Mode when I edit (Score > Page Mode unticked). Then, if I hover over the Voice Reverb marking, a rectangular frame (dashed line) appears around the object: just clicking the mouse turns this into a solid purple line, and then I just use the Delete key on the keyboard to delete it.
For your playback problem, you'd probably do best to attach your .myr file to a message on here and then people may be able to see what you are talking about. My first thought is that there might be a double bar line at the point where it stops playing.
--
Steve |
|
Thanks Steve, you provided the answer to the empty bars, the piece plays them when in scroll mode. I wasn't able to hover and get the rectangle to delete the mini van Gogh image, but JP's eraser I found eventually in the Edit tools in the drop down of windows, and Voila! gone.
|
|
offline |
Albert Einstein: "Only two things are definite, the Universe, and Human stupidity, and I am not sure about the former."
|
|
|
JP
Board Master
WWW | Email
Gender:
Posts: 1880
|
|
Re: "slight Reverb", How do get rid of these? or are they important?
« Reply #17 on: Jul 6th, 2012, 7:06pm » |
Quote | Modify
|
Hmm!
This seems to exceed my knowledge in HA functionalities.
Personally I use HA only for writing and printing scores, sometimes listening just to hear what the music looks like.
As you could see, the great thing in that forum is that you can (most) always find somebody -- or a combination of fellows with different skills -- to help you doing what you want to do without knowing how to do it.
Pleased to know that you took part in the (re-) creation of Atys. It seems to me it was a very very long time ago. Do you remember the year?
|
|
offline |
|
|
|
David09
Board Full Member
Gender:
Posts: 116
|
|
Re: "slight Reverb", How do get rid of these? or are they important?
« Reply #18 on: Jul 7th, 2012, 9:17am » |
Quote | Modify
|
on Jul 6th, 2012, 3:53pm, dheo wrote:Greetings,
On HA you can start playing the music where ever you want. At the top of your screen there is a tab that says score. If you click on it you can select/deselect page mode. If the Page mode is seleted you can slide down to Page mode set up and slide over and click on Display Control Handles. If this is engaged you should see a "ruler" at the top of the score. Each "section" of the ruler corresponds to a measure on the score. Right click on the ruler and set/reset play mark where you want the music to start. Hope this helps !
dheo |
|
Thanks dheo, I discovered that when in page mode the bars of silence are not played as normal. But in scroll mode all empty bars are played as printed, this is important for me since the vocals have to be taken back into Logic pro where the rest of the song is[the accompaniment].
|
|
offline |
Albert Einstein: "Only two things are definite, the Universe, and Human stupidity, and I am not sure about the former."
|
|
|
David09
Board Full Member
Gender:
Posts: 116
|
|
Re: "slight Reverb", How do get rid of these? or are they important?
« Reply #19 on: Jul 7th, 2012, 9:29am » |
Quote | Modify
|
on Jul 6th, 2012, 7:06pm, JP wrote:Hmm!
This seems to exceed my knowledge in HA functionalities.
Personally I use HA only for writing and printing scores, sometimes listening just to hear what the music looks like.
As you could see, the great thing in that forum is that you can (most) always find somebody -- or a combination of fellows with different skills -- to help you doing what you want to do without knowing how to do it.
Pleased to know that you took part in the (re-) creation of Atys. It seems to me it was a very very long time ago. Do you remember the year? |
|
No JP, that was Christes' first production of it in Paris, we did it in New York later, but I became too sick to continue working in 1993 and went on disability, and have been learning to play an Akai EWI4000, that is a wind instrument that needs no reed[thank god] but makes no sounds it sends MIDI cc's to Logic and I can control the volume and expression of any instrument I have a sample library for. The old fashioned sample libraries are just layers of the same note at increasing volumes,I have a collection of Wind instruments from a Swedish developer that uses Physical Modeling, it may be similar to VS. The breath blown into the Akai determines the amount of timbre,volume and expression, I am hoping there is a genius here who can help me move the VS into Logic where I hopefully could control those parameters using the midi CC's from the Akai.
|
|
offline |
Albert Einstein: "Only two things are definite, the Universe, and Human stupidity, and I am not sure about the former."
|
|
|
JP
Board Master
WWW | Email
Gender:
Posts: 1880
|
|
Re: "slight Reverb", How do get rid of these? or are they important?
« Reply #20 on: Jul 7th, 2012, 10:10am » |
Quote | Modify
|
on Jul 7th, 2012, 9:29am, David09 wrote:| I am hoping there is a genius here who can help me move the VS into Logic where I hopefully could control those parameters using the midi CC's from the Akai. |
|
I have no personal knowledge of the technology used by VS. Hope someone will be able to help you make the brigde.
|
|
offline |
|
|
|
|
